Skip to content

Furnace Repair in Simi Valley, CA

Serving Simi Valley and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 410-0763

The short answer

AdvancedAir Contractors repairs gas and electric furnaces in Simi Valley homes, from ignition and flame-sensor problems to blower and airflow issues. We diagnose the cause, explain your options before starting work, and help you decide whether a repair or a replacement makes more sense.

When a furnace won't light, short-cycles, or blows cool air on a chilly evening, you want a clear answer and a repair done right. AdvancedAir Contractors provides furnace repair for homes throughout Simi Valley, including the 93063 and 93065 ZIP codes. Our base is in Reseda, about 12 miles east, so Simi Valley is a regular part of our service area. We diagnose the actual cause, explain what we found in plain language, and give you your options before any work starts.

Common Furnace Problems in Simi Valley Homes

Simi Valley has mild winters, so many furnaces sit idle for months and then get asked to work on the first cold night of the season. That stop-and-start pattern tends to surface the same handful of problems. Dust settles on burners and sensors, filters get forgotten, and small electrical issues that were present last spring show up all at once.

These are the issues we diagnose and repair most often:

  • Furnace won't ignite or the igniter glows but the burners never light
  • Burners light briefly, then shut off a few seconds later, often a dirty flame sensor
  • Blower runs but the air coming out of the vents is cool
  • Short-cycling, where the furnace turns on and off every few minutes
  • Loud banging, rattling, squealing, or humming from the cabinet
  • Thermostat calls for heat but nothing happens
  • Weak airflow in some rooms, often tied to a clogged filter or duct issue
  • Error codes flashing on the control board

What Happens During a Repair Visit

We start by asking what you've noticed: when the problem began, whether it's constant or intermittent, and any sounds or smells. Then we check the system step by step, including the thermostat, power and safety switches, the ignition sequence, flame sensor, gas supply to the unit, inducer and blower motors, filter, and venting.

Once we know the cause, we explain it and walk you through the fix before doing the work. Some repairs, like cleaning a flame sensor or replacing a filter, are quick. Others, like a failed control board or blower motor, may require a part. Before we leave, we run the furnace through a full heating cycle to confirm it lights, stays lit, and moves air the way it should.

If we find anything that raises a safety concern, such as signs of a cracked heat exchanger or a venting problem, we'll show you what we found and explain why it matters.

How Simi Valley's Climate Affects Your Furnace

Inland valleys in Southern California run hotter in summer than areas near the coast, and fall Santa Ana winds can bring hot, dry, dusty spells. In many Simi Valley homes, the furnace and the air conditioner share the same blower and ductwork, so the blower works hard all summer even though the burners are off.

By late fall, that can mean a loaded filter, a dusty blower wheel, and a flame sensor that needs cleaning. Changing your filter after the windy season and testing your heat before the first cold snap can catch many problems early, when they're easier to schedule around.

Repair or Replace: What to Know First

Most furnace problems can be repaired. When a furnace is older, needs frequent repairs, or has a major component failure, replacement may be worth considering, and we'll give you an honest comparison of both paths.

If you're weighing a new system, a few things are worth knowing. Simi Valley is in Ventura County, and the air-quality rules that apply to new gas furnaces can differ from those in Los Angeles County, so we check the current requirements for your address before recommending equipment. Many homeowners also look at heat pumps. Equipment rebates depend on which utility serves your home, and much of the area outside the City of Los Angeles is served by Southern California Edison rather than LADWP, so we confirm the current offer for your address before quoting it. The federal 25C tax credit for heat pumps covered systems placed in service before December 31, 2025, and it is not available for new installations after that date.

Furnace Repair in Simi Valley and Nearby Areas

We serve homes across Simi Valley as well as nearby Agoura Hills, Hidden Hills, Westlake Village, Calabasas, and Santa Clarita. If your furnace is acting up, or you simply want it checked before you need it, contact AdvancedAir Contractors to schedule a visit.

More services in Simi Valley

Related

What to expect

How a visit goes

  1. We find the cause first

    Before we recommend anything, we test the system and track the symptom back to its source. That way you pay to fix the actual problem, not to replace parts until something works.

  2. We explain your options clearly

    You'll hear what we found, what it means for your system, and the choices you have, including whether a repair or a replacement makes more sense for the equipment's age and condition.

  3. We check the local details

    Furnace emissions rules and equipment rebates in Southern California depend on the district and on which utility serves your address. We confirm what currently applies to your home before you make a decision.

FAQ

Common questions

Why does my furnace light and then shut off after a few seconds?

The most common cause is a dirty or worn flame sensor that can't confirm the burners are lit, so the furnace shuts the gas off for safety. Restricted airflow or a venting issue can cause similar behavior, which is why we test the full sequence.

My furnace blows cold air. Is it broken?

Not always. Check that the thermostat is set to heat and that the fan isn't set to 'on' instead of 'auto.' If those are correct and the air stays cool, the burners likely aren't lighting, and a technician should diagnose the cause.

How often should I change my furnace filter in Simi Valley?

It depends on the filter type and your home, but because the same blower often runs for summer cooling, check it every month or two and replace it when it looks dirty, especially after dusty, windy stretches.

Is it safe to keep running a furnace that's making strange noises?

If you smell gas, leave the home and contact your gas utility right away. For banging, squealing, or rattling without a gas smell, turn the furnace off and schedule an inspection rather than running it until something fails.

Are there rebates if I replace my furnace with a heat pump?

That depends on the utility serving your address. Many homes in this area are served by Southern California Edison rather than LADWP, so we confirm the current rebate offer for your home before quoting it.

Can I still get the federal tax credit for a heat pump?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025, and it isn't available for new installations after that date.

Tell Us What Your System Is Doing

Whether it's warm air from the vents, a furnace that won't stay lit, or a strange noise you can't place, describe the problem and we'll set up a visit to diagnose it and walk you through your options.

Call (213) 410-0763 Request Service