Skip to content

Furnace Repair in Los Angeles, CA

Serving Los Angeles and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 410-0763

The short answer

AdvancedAir Contractors repairs gas furnaces and forced-air heating in Los Angeles homes, including ignition failures, cycling problems, airflow issues and safety shutdowns. Before you replace an old furnace, check the current South Coast AQMD rules on new gas furnaces and the utility rebates for heat pumps at your address.

Most Los Angeles homes don't run the heat for much of the year. Then a cold night arrives and the furnace won't light, smells like burning dust, or blows cool air. AdvancedAir Contractors repairs gas furnaces and forced-air heating systems in homes across Los Angeles, from our base in Reseda about 16 miles to the northwest. We find the actual fault, explain it in plain terms, and fix it so your home is warm again. We'll also tell you when a repair isn't worth making.

Why Los Angeles Furnaces Fail When You Need Them

Los Angeles has a Mediterranean climate with dry summers and mild winters. Many furnaces here sit unused for months, and that idle time causes problems of its own. Dust settles on the burners and flame sensor. Filters stay in place far longer than they should. Small parts like igniters and pressure switches can fail on the first start of the season instead of wearing out slowly.

Fall Santa Ana winds bring hot, dry spells that push extra dust into return vents and attics. In older homes, ductwork in crawlspaces or attics may also have loose joints that leak heated air. When a furnace has to run hard on a cold morning, these weak spots show up quickly.

Furnace Problems We Diagnose and Repair

We test the system in order: power, thermostat, ignition, gas supply, safety controls, blower and airflow. We don't just swap parts until something works. Common repairs in Los Angeles homes include:

  • Furnace won't ignite, or lights and then shuts off within seconds (often a dirty flame sensor or failed igniter)
  • Blower runs but the air coming out is cool
  • Short cycling: the furnace turns on and off repeatedly
  • Burning smell that lasts beyond the first few minutes of the season
  • Loud banging, rumbling or squealing from the burners or blower motor
  • Error codes or flashing lights on the control board
  • Tripped limit switches caused by clogged filters or blocked returns
  • Weak airflow in some rooms caused by duct leaks or a failing blower
  • Thermostat wiring or settings that keep the furnace from responding

Gas Smell or Carbon Monoxide? Act First

If you smell gas, don't touch light switches or appliances. Leave the house and call your gas utility or 911 from outside. If your carbon monoxide alarm goes off, get everyone outdoors and call 911. Once the home has been cleared, we can inspect the furnace for cracked heat exchangers, venting problems, or burners that aren't burning correctly. Those conditions should be repaired before the system runs again.

Repair or Replace? What Changes in the LA Region

Most furnace problems can be repaired. A new igniter, flame sensor, inducer motor or control board can keep a sound furnace running for years. Replacement is a better choice when the heat exchanger is cracked, when major parts keep failing, or when repair costs are close to the cost of a new system.

If you're considering replacement, keep in mind that South Coast AQMD Rule 1111 limits NOx emissions from natural-gas fan-type central furnaces sold and installed in the Los Angeles region. The district has been amending the rule toward zero-emission requirements and sets and revises the compliance dates. Check the current rule before you decide, and we'll walk you through how it affects your options.

Heat Pumps, Rebates and Tax Credits

Some homeowners replace a failing furnace with a heat pump that heats in winter and cools in summer. LADWP residential electric customers can apply for Consumer Rebate Program rebates on qualifying heat pump HVAC systems. The amount depends on the unit's SEER2/HSPF2 rating, and the application is filed after the equipment is purchased and installed, within 12 months of purchase.

Many homes outside the City of Los Angeles are served by Southern California Edison rather than LADWP, so the rebates you can get depend on the utility that serves your address. We confirm the current offer before we quote it. The federal Energy Efficient Home Improvement Credit (25C) covered heat pumps placed in service before December 31, 2025, and it doesn't apply to new installations after that date.

Where We Work in Los Angeles

We repair furnaces in Los Angeles homes in ZIP codes 90002, 90003, 90004, 90005, 90006, 90007, 90008, 90010, 90011 and 90012, along with other parts of the city. Nearby, we also serve Beverly Hills, Santa Monica, West Hollywood, Burbank and Calabasas. When you schedule, tell us what the furnace is doing, any error codes you see, and when it last had service. That helps us bring the right parts on the first visit.

More services in Los Angeles

Related

What to expect

How a visit goes

  1. We find the cause first

    Before we recommend anything, we test the system and track the symptom back to its source. That way you pay to fix the actual problem, not to replace parts until something works.

  2. We explain your options clearly

    You'll hear what we found, what it means for your system, and the choices you have, including whether a repair or a replacement makes more sense for the equipment's age and condition.

  3. We check the local details

    Furnace emissions rules and equipment rebates in Southern California depend on the district and on which utility serves your address. We confirm what currently applies to your home before you make a decision.

FAQ

Common questions

Why does my furnace smell like burning when I first turn it on?

Dust builds up on the burners and heat exchanger during the long off-season, and it burns off when the furnace starts. A smell that fades within a few minutes is normal. If it lingers, smells electrical, or comes back every time the furnace runs, turn the furnace off and have it inspected.

My furnace lights and then shuts off. What causes that?

A dirty or failing flame sensor is the most common cause. The control board can't confirm a flame, so it shuts off the gas as a safety step. Pressure switch problems, venting problems or a clogged filter can cause the same symptom, which is why we test before replacing parts.

Can I replace my old gas furnace with a new gas furnace in Los Angeles?

South Coast AQMD Rule 1111 limits NOx emissions from gas furnaces sold and installed in the region, and the district has been moving the rule toward zero-emission requirements. Compliance dates can change, so check the current rule before you plan a replacement.

Is there still a federal tax credit for a heat pump?

No, not for new installations. The 25C credit covered qualifying heat pumps placed in service before December 31, 2025. Utility rebates may still be available depending on which utility serves your home.

How do I know if LADWP or Southern California Edison serves my home?

Look at your electric bill. Many homes in the City of Los Angeles are on LADWP, while many nearby cities are served by Southern California Edison. Rebate options depend on the utility, and we confirm the current offer for your address.

How often should I change my furnace filter?

Check it at the start of the heating season and every month or two while the system is in use. Change it more often after Santa Ana wind events or if you have pets. A clogged filter is a common cause of overheating and safety shutdowns.

Tell Us What Your System Is Doing

Whether it's warm air from the vents, a furnace that won't stay lit, or a strange noise you can't place, describe the problem and we'll set up a visit to diagnose it and walk you through your options.

Call (213) 410-0763 Request Service