Skip to content

Heating Repair in Los Angeles, CA

Serving Los Angeles and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 410-0763

The short answer

AdvancedAir Contractors repairs furnaces, heat pumps and wall heaters in Los Angeles homes, including ZIP codes 90002 through 90012. Most failures we see come from systems sitting idle for months, and many can be repaired rather than replaced. If replacement does make sense, we walk you through local air-quality rules and the rebates your utility currently offers.

Los Angeles winters are mild, which is exactly why heating problems catch people off guard. A furnace or heat pump can sit unused from spring through fall, then fail on the first cold night of the season. AdvancedAir Contractors repairs gas furnaces, heat pumps and wall heaters in Los Angeles homes, working from our base in Reseda about 16 miles to the northwest. Our approach is simple. We find the actual cause, explain it in plain terms, and fix what's broken before talking about anything bigger.

Why Los Angeles Heating Systems Fail After Sitting Idle

Los Angeles has a Mediterranean climate with dry summers and mild winters. That means most home heating systems run hard for only a few weeks a year. Long idle stretches are hard on equipment in their own way. Dust settles on burners and flame sensors, and filters clog during months of air conditioning use. Small electrical problems also go unnoticed until the thermostat finally calls for heat.

Fall Santa Ana winds add to the problem. Their hot, dry gusts can push dust and debris into return vents, outdoor heat pump coils and furnace cabinets right before heating season starts.

  • Furnace clicks or tries to light, then shuts off after a few seconds
  • Blower runs but the air coming out is cool
  • Burning-dust smell that doesn't fade after the first hour of use
  • Heat pump runs constantly but the house never warms up
  • Thermostat is blank or doesn't respond to changes
  • Pilot light or igniter won't stay lit on an older wall heater

How We Diagnose and Repair Your Heater

A good repair starts with testing, not guessing. When we arrive, we ask what you've noticed, check the thermostat and power, and then run the system while we watch it work. On gas furnaces, we look at ignition, flame sensing, gas pressure, venting, safety switches and the blower. On heat pumps, we check the defrost cycle, reversing valve, refrigerant pressures and outdoor coil.

Once we know the cause, we tell you what failed, why, and what the repair involves before any work begins. Common fixes include cleaning or replacing a flame sensor, swapping a failed igniter, replacing a pressure switch or capacitor, clearing a blocked condensate line, and repairing loose or damaged wiring. If we spot something unsafe, such as a cracked heat exchanger or a venting problem, we explain it clearly and help you decide on next steps.

Repair or Replace? What Los Angeles Homeowners Should Know

Most heating calls end with a repair. Sometimes, though, an older system has a major failure and replacement deserves a look. In the Los Angeles region, that decision comes with a few local rules and programs worth understanding.

South Coast AQMD Rule 1111 limits nitrogen oxide emissions from natural-gas central furnaces sold and installed in the region. The district has been amending the rule toward zero-emission requirements and sets and revises its own compliance dates. Anyone planning a furnace replacement should check where the rule currently stands, and we'll help you sort that out.

If you're thinking about a heat pump, LADWP residential electric customers can apply for Consumer Rebate Program rebates on qualifying systems. The amount depends on the unit's SEER2 and HSPF2 ratings. You file the application after the equipment is purchased and installed, within 12 months of purchase. Some homes are served by Southern California Edison instead, so available rebates depend on your address. We confirm the current offer before quoting it. Note that the federal 25C tax credit for heat pumps ended for systems placed in service after December 31, 2025.

Areas We Serve in and Around Los Angeles

We provide heating repair throughout Los Angeles, including ZIP codes 90002, 90003, 90004, 90005, 90006, 90007, 90008, 90010, 90011 and 90012. We also serve nearby communities in Los Angeles County, including Beverly Hills, Santa Monica, West Hollywood, Burbank and Calabasas.

Quick Checks Before You Call

A few simple checks can sometimes get your heat back on, or at least help us diagnose the problem faster.

  • Confirm the thermostat is set to Heat and the temperature is set above room temperature
  • Replace the thermostat batteries if the screen is dim or blank
  • Check the breaker and the furnace's power switch, which often looks like a light switch near the unit
  • Replace a dirty air filter
  • Make sure the furnace door panel is fully closed, since many units won't run with it open
  • If you smell gas, leave the house and call your gas utility right away

More services in Los Angeles

Related

What to expect

How a visit goes

  1. We find the cause first

    Before we recommend anything, we test the system and track the symptom back to its source. That way you pay to fix the actual problem, not to replace parts until something works.

  2. We explain your options clearly

    You'll hear what we found, what it means for your system, and the choices you have, including whether a repair or a replacement makes more sense for the equipment's age and condition.

  3. We check the local details

    Furnace emissions rules and equipment rebates in Southern California depend on the district and on which utility serves your address. We confirm what currently applies to your home before you make a decision.

FAQ

Common questions

Why does my furnace smell like it's burning the first time I turn it on?

Dust settles on the burners and heat exchanger over months of non-use. A light burning-dust smell for the first hour is normal. If it lasts longer, smells electrical, or comes with smoke, turn the system off and have it inspected.

Do you repair heat pumps as well as gas furnaces?

Yes. We repair gas furnaces, heat pumps and wall heaters in Los Angeles homes, including problems with ignition, defrost cycles, refrigerant pressures, blowers and controls.

Can I still install a new gas furnace in Los Angeles?

Gas furnaces sold and installed in the region must meet South Coast AQMD Rule 1111. The district has been moving the rule toward zero-emission requirements and adjusts its compliance dates, so check the current rule before you plan a replacement. We can help with that.

Is there a rebate for switching to a heat pump?

LADWP residential electric customers can apply for rebates on qualifying heat pump systems, with the amount based on the unit's efficiency ratings. You apply within 12 months of purchase, after installation. If Southern California Edison serves your home, the options are different. We confirm what's available for your address.

Can I still claim the federal tax credit for a heat pump?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. It doesn't apply to new installations after that date.

How often should my heating system be checked in Los Angeles?

Once a year in the fall is a good rhythm. A check after the Santa Ana season and before the first cold nights catches dirty sensors, clogged filters and weak parts while they're still easy to fix.

Tell Us What Your System Is Doing

Whether it's warm air from the vents, a furnace that won't stay lit, or a strange noise you can't place, describe the problem and we'll set up a visit to diagnose it and walk you through your options.

Call (213) 410-0763 Request Service